Deck Cleaning

Product: Simoniz Deck & Fence Mildew Cleaner

Please consult the proper Surface Preparation before proceeding with use of this chemical.

Pre-rinse deck and surrounding area with fresh water. Using Simoniz Deck & Fence Mildew Cleaner, fill foamer bottle or insert the detergent suction tube, if your machine is equipped with one, directly into cleaning solution and apply to surface at low pressure. For best results, limit your work area to smaller sections of approximately 25 square feet. Allow Simoniz Deck & Fence Mildew Cleaner to remain on surface 1-3 minutes. Do not allow detergent to dry on surface. Rinse at high pressure in a long sweeping motion keeping the spray nozzle approximately 3-6 inches from the cleaning surface. Always clean from top to bottom and from left to right. When moving on to a new section of the cleaning surface, be sure to overlap the previous section to eliminate stop marks and ensure a more even cleaning result.

For tenacious, hard to remove mildew stains, a pretreatment may be required. Using a pump-up sprayer, add 1 cup of Simoniz Deck & Fence Mildew Cleaner to 1 gallon of water. For added mold and mildew effectiveness, add 1 cup of household bleach. Pump sprayer and apply solution to the surface to be cleaned starting at the bottom. Allow solution to remain on the surface for approximately 1-3 minutes, not allowing it to dry. Agitate with a stiff broom and rinse with pressure washer thoroughly from bottom of surface to the top.