Brick & Stone

Product: Simoniz Heavy Duty Degreaser

  
 
Please consult the proper Surface Preparation before proceeding with use of this chemical.

Pre-rinse cleaning surface with fresh water. Using Simoniz Heavy Duty Degreaser, fill foamer bottle or insert the detergent suction tube, if your machine is equipped with one, directly into cleaning solution and apply to surface at low pressure. For best results, limit your work area to smaller sections of approximately 25 square feet. Allow Simoniz Heavy Duty Degreaser to remain on surface 1-3 minutes. Do not allow detergent to dry on surface. Rinse at high pressure in a sweeping motion keeping the spray nozzle approximately 3-6 inches from the cleaning surface. Always clean from top to bottom and from left to right.

For hard to remove environmental stains, a second application of Simoniz Heavy Duty Degreaser may be required. Apply as above, allowing the solution to remain on the surface for approximately 1-3 minutes, not allowing it to dry. Agitate with a stiff broom and rinse with pressure washer thoroughly using the turbo nozzle spray wand.