House & Siding

Product: Simoniz House & Siding Wash

Please consult the proper Surface Preparation before proceeding with use of this chemical.

Pre-rinse cleaning surface with fresh water. Using Simoniz House & Siding Wash, fill foamer bottle or insert the detergent suction tube, if your machine is equipped with one, directly into cleaning solution and apply to surface at low pressure (for best results, limit your work area to sections of approximately 6 feet and always apply detergent from bottom to top). Allow Simoniz House & Siding Wash to remain on surface 1-3 minutes. Do not allow detergent to dry on surface. If surface appears to be drying, simply wet down with fresh water. If needed, use the special Wash Brush attachment to remove stubborn dirt. Rinse at high pressure from top to bottom in an even sweeping motion keeping the spray nozzle approximately 6 inches from the cleaning surface.

For removal of difficult rust and gutter stains, a low pressure pretreatment may be required. Apply as above, allowing solution to remain on the surface for approximately 1-3 minutes, not allowing it to dry. Agitate with a soft bristle brush and rinse with pressure washer thoroughly from the bottom of surface to the top using the turbo nozzle spray wand.