Cars & Boats

Product: Simoniz Car & Boat Wash

  
 
Please consult the proper Surface Preparation before proceeding with use of this chemical.

Pre-rinse vehicle with fresh water. Using Simoniz Car & Boat Wash, fill foamer bottle or insert the detergent suction tube, if your machine is equipped with one, directly into cleaning solution and apply to surface at low pressure. For best results, clean one side of vehicle at a time and always apply detergent from bottom to top. Do not allow detergent to dry on surface. If needed, use the special Wash Brush attachment to remove stubborn dirt. Rinse at high pressure in a sweeping motion keeping the spray nozzle approximately 6-8 inches from the cleaning surface (distance should increase when rinsing pin striping or other sensitive surfaces). Always clean from top to bottom and from left to right. For best results, wipe surface dry with a chamois or soft dry cloth.

For removal of tenacious stains caused by road film, bugs, algae or water line stains (on boats), a second application of Simoniz Car & Boat Wash may be required. Apply as above, allowing the solution to remain on the surface for approximately 1-3 minutes, not allowing it to dry. Agitate with a soft broom and rinse thoroughly using the turbo nozzle spray wand.